HL7 Europe Imaging Study Report
0.1.0-ballot - ci-build 150

HL7 Europe Imaging Study Report, published by HL7 Europe. This guide is not an authorized publication; it is the continuous build for version 0.1.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/oijauregui/ehdsimaging/tree/master and changes regularly. See the Directory of published versions

Resource Profile: Report_EuBodyStructure - Detailed Descriptions

Draft as of 2025-07-02

Definitions for the Report-EuBodyStructure resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. BodyStructure
Definition

Record details about an anatomical structure. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

ShortSpecific and identified anatomical structure
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesanatomical location
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. BodyStructure.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. BodyStructure.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. BodyStructure.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. BodyStructure.active
Definition

Whether this body site is in active use.

ShortWhether this record is in active use
Comments

This element is labeled as a modifier because it may be used to mark that the resource was created in error.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Need to be able to mark a body site entry as not to be used because it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. BodyStructure.morphology
Definition

The kind of structure being represented by the body structure at BodyStructure.location. This can define both normal and abnormal morphologies.

ShortKind of Structure
Comments

The minimum cardinality of 0 supports the use case of specifying a location without defining a morphology.

Control0..1
BindingFor example codes, see SNOMEDCTMorphologicAbnormalitieshttp://hl7.org/fhir/ValueSet/bodystructure-code
(example to http://hl7.org/fhir/ValueSet/bodystructure-code)

Codes describing anatomic morphology.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Obligations
    ObligationsActorDocumentation
    SHALL:populate-if-knownImaging study report provider

    EHDSImagingReportBody.examinationReport.bodyPart.bodyLocation, EHDSSpecimen.morphology

    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. BodyStructure.includedStructure
    Definition

    The anatomical location(s) or region(s) of the specimen, lesion, or body structure.

    ShortIncluded anatomic location(s)
    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. BodyStructure.includedStructure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. BodyStructure.includedStructure.structure
    Definition

    Code that represents the included structure.

    ShortCode that represents the included structure
    Control1..1
    BindingFor example codes, see SNOMEDCTBodyStructureshttp://hl7.org/fhir/ValueSet/body-site
    (example to http://hl7.org/fhir/ValueSet/body-site)

    SNOMED CT Body site concepts

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Obligations
      ObligationsActorDocumentation
      SHALL:populate-if-knownImaging study report provider

      EHDSImagingReportBody.examinationReport.bodyPart.bodyLocation

      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. BodyStructure.includedStructure.laterality
      Definition

      Code that represents the included structure laterality.

      ShortCode that represents the included structure laterality
      Control0..1
      BindingFor example codes, see BodystructureLocationQualifierhttp://hl7.org/fhir/ValueSet/bodystructure-relative-location
      (example to http://hl7.org/fhir/ValueSet/bodystructure-relative-location)

      Concepts modifying the anatomic location.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Obligations
        ObligationsActorDocumentation
        SHALL:populate-if-knownImaging study report provider

        EHDSImagingReportBody.examinationReport.bodyPart.laterality, EHDSProcedure.anatomicLocation

        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. BodyStructure.patient
        Definition

        The person to which the body site belongs.

        ShortWho this is about
        Control1..1
        TypeReference(Patient (EU base), Patient)
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be foundhere

        0. BodyStructure
        2. BodyStructure.morphology
        Obligations
          ObligationsActorDocumentation
          SHALL:populate-if-knownImaging study report provider

          EHDSImagingReportBody.examinationReport.bodyPart.bodyLocation, EHDSSpecimen.morphology

          4. BodyStructure.includedStructure
          6. BodyStructure.includedStructure.structure
          Obligations
            ObligationsActorDocumentation
            SHALL:populate-if-knownImaging study report provider

            EHDSImagingReportBody.examinationReport.bodyPart.bodyLocation

            8. BodyStructure.includedStructure.laterality
            Obligations
              ObligationsActorDocumentation
              SHALL:populate-if-knownImaging study report provider

              EHDSImagingReportBody.examinationReport.bodyPart.laterality, EHDSProcedure.anatomicLocation

              Guidance on how to interpret the contents of this table can be foundhere

              0. BodyStructure
              Definition

              Record details about an anatomical structure. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

              ShortSpecific and identified anatomical structure
              Control0..*
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesanatomical location
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              2. BodyStructure.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

              Control0..1
              Typeid
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              4. BodyStructure.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. BodyStructure.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. BodyStructure.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHALL be taken from AllLanguages
              (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

              IETF language tag for a human language

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. BodyStructure.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              This element is affected by the following invariants: dom-6
              TypeNarrative
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. BodyStructure.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

              Control0..*
              This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
              TypeResource
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. BodyStructure.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              16. BodyStructure.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Must Supportfalse
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. BodyStructure.identifier
              Definition

              Identifier for this instance of the anatomical structure.

              ShortBodystructure identifier
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. BodyStructure.active
              Definition

              Whether this body site is in active use.

              ShortWhether this record is in active use
              Comments

              This element is labeled as a modifier because it may be used to mark that the resource was created in error.

              Control0..1
              Typeboolean
              Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Requirements

              Need to be able to mark a body site entry as not to be used because it was created in error.

              Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              22. BodyStructure.morphology
              Definition

              The kind of structure being represented by the body structure at BodyStructure.location. This can define both normal and abnormal morphologies.

              ShortKind of Structure
              Comments

              The minimum cardinality of 0 supports the use case of specifying a location without defining a morphology.

              Control0..1
              BindingFor example codes, see SNOMEDCTMorphologicAbnormalities
              (example to http://hl7.org/fhir/ValueSet/bodystructure-code)

              Codes describing anatomic morphology.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Obligations
                ObligationsActorDocumentation
                SHALL:populate-if-knownImaging study report provider

                EHDSImagingReportBody.examinationReport.bodyPart.bodyLocation, EHDSSpecimen.morphology

                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. BodyStructure.includedStructure
                Definition

                The anatomical location(s) or region(s) of the specimen, lesion, or body structure.

                ShortIncluded anatomic location(s)
                Control1..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. BodyStructure.includedStructure.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                28. BodyStructure.includedStructure.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                30. BodyStructure.includedStructure.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                32. BodyStructure.includedStructure.structure
                Definition

                Code that represents the included structure.

                ShortCode that represents the included structure
                Control1..1
                BindingFor example codes, see SNOMEDCTBodyStructures
                (example to http://hl7.org/fhir/ValueSet/body-site)

                SNOMED CT Body site concepts

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Obligations
                  ObligationsActorDocumentation
                  SHALL:populate-if-knownImaging study report provider

                  EHDSImagingReportBody.examinationReport.bodyPart.bodyLocation

                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  34. BodyStructure.includedStructure.laterality
                  Definition

                  Code that represents the included structure laterality.

                  ShortCode that represents the included structure laterality
                  Control0..1
                  BindingFor example codes, see BodystructureLocationQualifier
                  (example to http://hl7.org/fhir/ValueSet/bodystructure-relative-location)

                  Concepts modifying the anatomic location.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Obligations
                    ObligationsActorDocumentation
                    SHALL:populate-if-knownImaging study report provider

                    EHDSImagingReportBody.examinationReport.bodyPart.laterality, EHDSProcedure.anatomicLocation

                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    36. BodyStructure.includedStructure.bodyLandmarkOrientation
                    Definition

                    Body locations in relation to a specific body landmark (tatoo, scar, other body structure).

                    ShortLandmark relative location
                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    38. BodyStructure.includedStructure.bodyLandmarkOrientation.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    40. BodyStructure.includedStructure.bodyLandmarkOrientation.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    42. BodyStructure.includedStructure.bodyLandmarkOrientation.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    44. BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription
                    Definition

                    A description of a landmark on the body used as a reference to locate something else.

                    ShortBody ]andmark description
                    Control0..*
                    BindingFor example codes, see SNOMEDCTBodyStructures
                    (example to http://hl7.org/fhir/ValueSet/body-site)

                    Select SNOMED code system values. Values used in a podiatry setting to decsribe landmarks on the body.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    46. BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition
                    Definition

                    An description of the direction away from a landmark something is located based on a radial clock dial.

                    ShortClockface orientation
                    Control0..*
                    BindingFor example codes, see BodystructureBodyLandmarkClockFacePosition
                    (example to http://hl7.org/fhir/ValueSet/bodystructure-bodylandmarkorientation-clockface-position)

                    Select SNOMED CT codes. A set of codes that describe a things orientation based on a hourly positions of a clock face.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    48. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark
                    Definition

                    The distance in centimeters a certain observation is made from a body landmark.

                    ShortLandmark relative location
                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    50. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    52. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    54. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    56. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device
                    Definition

                    An instrument, tool, analyzer, etc. used in the measurement.

                    ShortMeasurement device
                    Control0..*
                    BindingFor example codes, see DeviceType
                    (example to http://hl7.org/fhir/ValueSet/device-type)

                    Codes to identify medical devices.

                    TypeCodeableReference(Device)
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    58. BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value
                    Definition

                    The measured distance (e.g., in cm) from a body landmark.

                    ShortMeasured distance from body landmark
                    Control0..*
                    TypeQuantity
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    60. BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation
                    Definition

                    The surface area a body location is in relation to a landmark.

                    ShortRelative landmark surface orientation
                    Control0..*
                    BindingThe codes SHOULD be taken from BodystructureLocationQualifier
                    (preferred to http://hl7.org/fhir/ValueSet/bodystructure-relative-location)

                    Select SNOMED code system values. The surface area a body location is in relation to a landmark.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    62. BodyStructure.includedStructure.spatialReference
                    Definition

                    XY or XYZ-coordinate orientation for structure.

                    ShortCartesian reference for structure
                    Control0..*
                    TypeReference(ImagingSelection)
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    64. BodyStructure.includedStructure.qualifier
                    Definition

                    Code that represents the included structure qualifier.

                    ShortCode that represents the included structure qualifier
                    Control0..*
                    BindingFor example codes, see BodystructureLocationQualifier
                    (example to http://hl7.org/fhir/ValueSet/bodystructure-relative-location)

                    Concepts modifying the anatomic location.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    66. BodyStructure.excludedStructure
                    Definition

                    The anatomical location(s) or region(s) not occupied or represented by the specimen, lesion, or body structure.

                    ShortExcluded anatomic locations(s)
                    Control0..*
                    TypeSeettp://hl7.org/fhir/StructureDefinition/BodyStructure#BodyStructure.includedStructure
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    68. BodyStructure.description
                    Definition

                    A summary, characterization or explanation of the body structure.

                    ShortText description
                    Comments

                    This description could include any visual markings used to orientate the viewer e.g. external reference points, special sutures, ink markings.

                    Control0..1
                    Typemarkdown
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    70. BodyStructure.image
                    Definition

                    Image or images used to identify a location.

                    ShortAttached images
                    Control0..*
                    TypeAttachment
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    72. BodyStructure.patient
                    Definition

                    The person to which the body site belongs.

                    ShortWho this is about
                    Control1..1
                    TypeReference(Patient (EU base))
                    Is Modifierfalse
                    Must Supportfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))